Supported Hardware - M.A.L.s | IPEmotion

Supported Measurement Hardware Devices

The IPEmotion M.A.L.-Concept is "OPEN TO EVERYTHING". M.A.L. stands Manufacturer Application Layer and is the open interface concept of IPEmotion. M.A.L.s is used as device drivers. The following list is an overview of the current supported devices. You will find further information about M.A.L. development in our IPEmotion Forum.

Overview M.A.L.-PlugIns which IPETRONIK provides:

CAN M.A.L.-PlugIn
IPETRONIK CAN M.A.L.-PlugIn
IPETRONIK LOG M.A.L.-PlugIn
NI-DAQmx M.A.L.-PlugIn
Gas Service M.A.L.-PlugIn
GPS M.A.L.-PlugIn
W+W Resi-Box M.A.L.-PlugIn

CAN M.A.L.-PlugIn

Version: V.01.01.00

Download: IPEmotion M.A.L. Downloads

Application: direct measurements at the CANbus

Overview of supported hardware:

Vector
- CANcardXL
- CANcaseXL
- CANboardXL
- CANboardXLcompact
- CANcardX
- CANcardY

Kvaser
- LAPcan
- PCcan
- PCIcan
- PCIcan II
- USBcan II
- Leaf
- PCIcanx II
- MemoratorPro
- USBcanPro
- BlackBird

IPETRONIK
- IPEcan
- IPEcan powered by PEAK (PCAN-USB)
- M-Wifi

PEAK
- PCAN-USB
- PCAN-USB Pro
- PCAN-USB Hub

NI
- PCI-CAN
- PXI-CAN
- PCMCIA-CAN
- AT-CAN
- USB-CAN

Softing
- CANcard2
- EDICcardC
- EDICcard2
- CAN-Acx-PCI
- CAN-Acx-PCI-DN
- CANusb
- CAN-PROx-PCI

TRAMA
- CW-ISUB

More about these products:
www.ipetronik.com / www.peak-system.com / www.kvaser.com
www.vector.com / www.softing.com / www.ni.com

top

IPETRONIK CAN M.A.L.-PlugIn

Version: V01.02.00

Download: IPEmotion M.A.L. Downloads

Application: Configuring and measurement at IPETRONIK CAN modules

Overview of supported hardware:

Voltage / Power:
- M-SENS
- M-SENS DSP
- M-SENS 8
- M-SENS 8 DSP
- M-SENS 8plus
- M-SENS 8plus DSP
- SIM-SENS
- SIM-SENS DSP
- SIM-VIN
- SIM-VOUT
- SIM-STG
- SIM-DMS
- SIM-DMS DSP

Temperature
- M-THERMO
- M-THERMO 16
- M-THERMO T
- µ-THERMO
- SIM-TH II-8
- SIM-TH II-16
- SIM-THERMO
- SIM-TH II-8N
- SIM-SBUS
- SIM-PT100
- SIM-PT200

Pressure
- CANpressure ABS 1, 2, 5, 10, 20, 25, 30, 50, 100, 200, 250 Bar
- CANpressure REL 1, 2, 5, 10, 20, 25, 30, 50, 100, 200, 250 Bar

Counter / Frequency:
- M-FRQ
- SIM-CNT

More information about our devices at www.ipetronik.com

top

IPETRONIK LOG M.A.L.-PlugIn

Version: V03.19.00

Download: IPEmotion M.A.L. Downloads

Application: Configuring and measurement at IPETRONIK data loggers

Overview of supported hardware:

IPETRONIK M-LOG
- M-LOG 2 CAN
- M-LOG 4 CAN
- M-LOG 8 CAN
- M-LOG 2 CAN + 4 ETH
- M-LOG 6 CAN + 2 LIN

IPETRONIK S-LOG
- S-LOG 2 CAN
- S-LOG 4 CAN
- S-LOG 8 CAN

More information about our devices at www.ipetronik.com

top

NI-DAQmx M.A.L.-PlugIn

Version: V01.00.00

Download: IPEmotion M.A.L. Downloads

Application:

Overview of supported hardware:

DAQmx USB 6501
DAQmx USB 6221 BNC

More about the modules at www.ni.com

top

Gas Service M.A.L.-PlugIn

Version: V01.00.00

Download: IPEmotion M.A.L. Downloads

Application: Gas / Bubble Analyses, Leckage measurements

Overview of supported hardware:

INNOVA 1412

More at www.lumasense.dk and IPETRONIK Technology-Center www.ipetronik.com

top

GPS Service M.A.L.-PlugIn

Version: V01.00.00

Download: IPEmotion M.A.L. Downloads

Application:

Overview of supported hardware:

all GPS-Tracker with the following features
- NMEA-compatible with serial Interface
- NMEA-compatible with USB
  (via virtual COM-Port)
- NMEA-compatible with Buetooth
  (via virtual COM-Port)